|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
PRM 81162
Black
Wide Front Bumper Internet price $6.95 |
Fits all versions of the Traxxas
vehicles Rustler Nitro Rustler Nitro Sport, Nitro Stampede,
Stampede, Bandit VLX Rustler VLX, Slash. This bumper can be
flipped upside down and can be used to mount a late model body.
The body post we use are made from custom works the part number is
CW 3228 long body post. |
Retails
$6.95 |
|
|
|
Click to Enlarge |
PRM 81165
Blue
Wide Front Bumper |
Fits all versions of the Traxxas
vehicles Rustler Nitro Rustler Nitro Sport, Nitro Stampede,
Stampede, Bandit VLX Rustler VLX, Slash. This bumper can be
flipped upside down and can be used to mount a late model body.
The body post we use are made from custom works the part number is
CW 3228 long body post. |
Retails
$6.95 |
out of stock |
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
SRP No
Blue
1700 Traxxas Nitro Rustler conversion kit |
Traxxas Nitro Rustler conversion kit |
Retails
$39.00 |
|
| |
Click to Enlarge |
SRP No
Black
1700 Traxxas Nitro Rustler conversion kit |
TTraxxas Nitro Rustler conversion kit |
Retails
$39.00 |
|
| |
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
SRP No 1701
Blue
Traxxas Nitro Rustler conversion kit
|
Traxxas Nitro Rustler conversion kit |
Retails
$39.00 |
|
| |
Click to Enlarge |
SRP No 1701
Black
Traxxas Nitro Rustler conversion kit
|
Traxxas Nitro Rustler conversion kit |
Retails
$39.00 |
|
| |
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
Nitro see through
plastic Filter |
Nitro see through plastic Filter
This little filter is much smaller than the other brands made. The
outside diameter is .270 x 7/8 long just slightly larger than you
fuel tubing. The clear side of the filter is the inlet for the
nitro fuel. This being the filter side you can see if your getting
contaminated fuel. Of if the filter need cleaned. The filter comes
apart in four pieces you have the blue anodized outlet, the
o-ring, fuel filter, clear plastic inlet. The filter is held
together by the inlet and outlet being threaded together. With the
o-ring to seal the two halfs together.
The fuel line filter will work on Losi XXX- NT Nitro Speed T
Associated GT GT2 MGT SC8 RC8 Traxxas T Maxx Revo Jato 3.3 Slayer
Nitro Rustler Nitro Stamped HPI Nitro Savage Nitro RS4 Nitro
Firestorm Custom Works GSX Intimidator GSX Enforcer Duratrax Nitro
Evader. |
Retails
$3.95
|
|
| |
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
SRP Silicone
rubber coated fuel line Insulator 6 inch |
Nitro fuel line Heat Insulator
Silicone rubber coated fiberglass sleeve are design to slide over
the fuel tube. Most fuel tubes will lay right up against the head
or on the hot muffler. Which the heat will create a air lock in
your fuel line. Buy sliding the insulator sleeve over the line it
prevents the heat from the motor interring in the fuel. The
outside will shield out to 400 degs F before the sleeve will
degrade. I have them in two length one is 6 inches and the other
is 12 inches. The 6 inch will do most 12 size motors so if you are
using something larger than you may want to buy the 12 inch piece
and cut it to fit. The fuel line insulator will work on Losi XXX-
NT Nitro Speed T Associated GT GT2 MGT SC8 RC8 Traxxas T Maxx Revo
Jato 3.3 Slayer Nitro Rustler Nitro Stamped HPI Nitro Savage Nitro
RS4 Nitro Firestorm Custom Works GSX Intimidator GSX Enforcer
Duratrax Nitro Evader. |
Retails
$1.50
|
|
| |
Click to Enlarge |
SRP Silicone
rubber coated fuel line Insulator 12 inch |
Nitro fuel line Heat Insulator
Silicone rubber coated fiberglass sleeve are design to slide over
the fuel tube. Most fuel tubes will lay right up against the head
or on the hot muffler. Which the heat will create a air lock in
your fuel line. Buy sliding the insulator sleeve over the line it
prevents the heat from the motor interring in the fuel. The
outside will shield out to 400 degs F before the sleeve will
degrade. I have them in two length one is 6 inches and the other
is 12 inches. The 6 inch will do most 12 size motors so if you are
using something larger than you may want to buy the 12 inch piece
and cut it to fit. The fuel line insulator will work on Losi XXX-
NT Nitro Speed T Associated GT GT2 MGT SC8 RC8 Traxxas T Maxx Revo
Jato 3.3 Slayer Nitro Rustler Nitro Stamped HPI Nitro Savage Nitro
RS4 Nitro Firestorm Custom Works GSX Intimidator GSX Enforcer
Duratrax Nitro Evader. |
Retails
$3.00
|
|
| |
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
SRP Silicone Rubber nitro fuel tubing 3
ft length Yellow |
Silicone Rubber nitro
fuel tubing 3 ft length Yellow |
Retails
$3.25 |
|
|
|
Click to Enlarge |
SRP Silicone Rubber nitro fuel tubing 3
ft length Orange |
Silicone Rubber nitro
fuel tubing 3 ft length Orange |
Retails
$3.25 |
|
|
Click to Enlarge |
SRP Silicone Rubber nitro fuel tubing 3
ft length Purple |
SRP Silicone Rubber
nitro fuel tubing 3 ft length Purple |
Retails
$3.25 |
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
SRP No 6026 Speed control or
Receiver mounting kit. |
In the kit you get the bottom base plate
that will fasten in you chassis. With double side tape and you get the
top tray that you mount either your speed control or receiver. Before
mounting you will want to clean both surfaces then peal the backing off
of the double sided tape and place the base with the threaded fasteners
on your chassis. And fasten the your radio Equipment to the removable
tray. then install the tray with the 4-40 pan head screws to the base.
This was design so you could remove the radio with out any damaged to
the equipment, Or you can buy a second base and use the same speed
control and receiver in a second car. The Pictures at the top show a
Mamba brushless speed control and airtronics receiver mounted to the
trays. |
Retails
$7.95 |
|
| |
|
|
|
|
