|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
TSR150019 TSR
1500s 1.19-6 Cell |
TSR 1500s 1.19-6 Cell - Micro
Cells
MATCHED MICRO CELLS THE BEST BATCH EVER!!!
ALL TSR MATCHED 1.19 CELLS WILL BE UPGRADES TO 1.20 CELLS MICRO ON
ROAD NATIONAL CHAMPION'S 1500 MATCHED PACKS.
Get the Cells that has won 12 Micro On and Off Road National
Titles in 1 year. These are the best performing 2 3 A cells on the
market with the highest Voltage, Runtime and lowest IR |
Retails
$35.00
|
|
| |
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
LOSB 1883 0 deg
rear pivot block |
Losi 0Deg rear pivot block is made
for the 2-generation sprint car. This take all the rear toe out of
the sprint car. If you race carpet or hi-bite clay racetrack. |
Retails
$11.95 |
|
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
LOSB 1399 1/18
Mini Driver Figure Set |
This little driver can be hand
painted and detailed with sharpie markers. You can use the driver
on about any 1/18 or 1/12 scale body |
Retails
$6.95 |
|
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
LOSB 1065 Metal
Tranny Gear Set |
This set can be used in a losi mini t
Losi mini slider mini late model. You get the Center diff gear,
the three bevel (spider) gears, the two output gears, and the
idler gear. The Input shaft gear in your gearbox is already metal.
We recommend that you use the plastic idler gear that comes with
the original tranny. Because the metal idler gear wears the top
shaft brass gear. Withstands any standard brushless/LiPo combo you
can use. When installing these I highly recommend you install the
Dual Disk Slipper Clutch (part # LOSB1131) in the Mini Late Model
or the Double Disk Slipper for Mini V2 Transmission (part #
LOSB1130) in the Mini Sprint. We also carry two special racing
greases. Speed Grease and our Crystal Blue 100% synthic HiTemp. |
Retails
$15.95 |
out of stock |
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
LOSB 1041 1/18
Suspension pin set |
Pin set is made for the losi mini
slider print car, mini late model |
Retails
$5.99 |
|
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
LOSB 1057 Rear
bumper/Nerf Bar Set |
This set is made for the Losi mini
latemodel in the packaged. Comes with the right and left nerf bars
and the rear bumper and mounting bracket. You will need the LOSB
1047 Complete Screw Set for the mounting hardware to install this
on your car. |
Retails
$6.99 |
|
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
CSECM2068 6800KV MAMBA micro motor |
1/18
Scale Car ~ Associated and Losi
Castle Creations CM-20 Brushless Motor |
Retails
$56.95 |
out of stock |
|
|
Click to Enlarge |
CSECM2080 8000KV MAMBA micro motor |
1/18
Scale Car ~ Associated and Losi
Castle Creations CM-20 Brushless Motor |
Retails
$75.95 |
out of stock |
|
|
|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
Mini servo for the 18T MinT
|
Here is a Brand new Metal gear servo that will fit in a mini 18T or
mini T with
some spacing and modification. The servo is strong enough to be used
without a
servo saver. Which will take out the play in the steering on the cars.
We have a
limited supply in stock and will have more for this month.
Weight .55oz
Torque at 4.8v 50oz/in
Torque at 6.v 57oz/in
Speed at 4.8v .15sec
Speed at 6.v .13sec
Size 1.16 x .51 x 1.02
Metal Gear Servo |
Retails
$32.00 |
|
| |
| |
