|
|
|
New Product |
|
|
|
|
|
|
|
Click on Picture to Enlarge
This is a hand made and partly ready to assemble,
The body is made buy the Mustang racing bodies and Accessories
company. In the kit your get the two sail panels the center of the
body and the roof, comes with the nylon hardware. All you have to do
is fit it too the car you going to use it on and drill the holes for
the nylon fasteners. This body will fit the Custom Works & Terminators
Race Cars, and the Electric Buggies. |
|
Must No 2000 High Down-force body
Price $45.00 |
|
|
|
|
Venom
5-8-cell multi charger
Click on Picture to Enlarge
The venom 5-8-cell multi charger is an
all-purpose charger designed to charge 5-8 cell NiCD and NiMH
battery packs.
With two different charge settings 1.8 amps for larger capacity
call/packs or .9 amps for smaller capacity cell like those
found in receiver and micro packs Designed with simplicity in
mind, Just select the proper charge rate and plug in the
battery. When the battery has finished charging. The led on the
charger will change from red to green.
The Venom multi charger plugs into a standard wall outlet
(100-240v AC)
For 1100-2400mah batteries use the .9A setting. For batteries
2400mah or higher, use the 1.8A high rate charge.
Venom dose not recommend charging batteries smaller than 900 mah
as damage can occur from charging too quickly.
Battery packs should never exceed 120 deg F while charging.
The instructions say to plug your battery into the charger, the
LED will change from solid green to solid red
indicating the battery is charging. If the LED flashes there in a
problem with the battery or the wiring of the battery.
Once charge is complete the LED will go from red to green. We will
sell the charger with one of the two plug converters.
The charger with the Ven-1607 is a RX plug
the VEN-1615 is a JST plug converter.
|
|
SRP No VEN -0650 MULTI CHARGER with
VEN-1615 JST plug Price $22.00 |
|
SRP No VEN -0650 MULTI CHARGER with
VEN-1607 RX plug Price $22.00 |
|
|
|
|
|
|
Here are new pictures for the custom works wheels and tires
with 2 different rubber compounds.
Click on Picture to Enlarge |
|
CW~6204
STREET TRAC front tire retails $11.95 |
|
CW~6205
STREET TRAC front tire 'HB' Retails $12.95 |
| |
Click on Picture to Enlarge |
|
CW~6214
STREET TRAC rear tire retails $12.95 |
|
CW~6215
STREET TRAC rear tire 'HB' Retails $12.95 |
| |
Here is a picture of the front rims on the custom works
cars.
Click on Picture to Enlarge |
|
CW
6252 Front Wheel for Rubber tire Retails $8.45 |
| |
Click on Picture to Enlarge |
|
CW
6253 Rear wheel for Rubber tire $8.45 |
| |
Custom
works foam inserts for the rubber tires.
Click on Picture to Enlarge |
|
CW
6220 Front foam inserts (soft) Retails $3.50 |
| |
Click on Picture to Enlarge |
|
CW
6230 Rear foam inserts (soft) Retails $3.75 |
| |
Click on Picture to Enlarge |
|
CW
6221 Front foam inserts (medium) Retails $3.50 |
| |
Click on Picture to Enlarge |
|
CW 6231 Rear Foam inserts (medium) Retails $3.75 |
| |
|
|
|
|
Click on Picture to Enlarge
Here is a new product form the Mustang racing bodies this is
a universal side dam wing kit. The wing is 16" inches long and 5 ¼"
high. The wing will fit most late model bodies oval truck bodies. And
will also work on the large 1/10 scale gas late model truck body. In
the kit you get 8 nylon nuts and screws to mount the bottom wing to
the body. The body brackets and wing mounts, it comes with two 1/16
carbon fiber wing braces the hardware to adjust any height of wing you
want.
Mustn
1020 Side dam Wing Kit internet price $12.95
|
|
. |
Click on Picture to Enlarge
Late 30's
Modified Coupe body that can be used for dirt oval or pavement oval.
The body is formed with shorty fenders that can be used for an early
modified look (50's & early 60's), or the fenders can be trimmed off
for a 70's Modified Coupe look. Comes with paint mask for windows and
add on exhaust headers. Available now.
McA #240 Modified Coupe body
1/10th scale Internet price $18.00
|
|
|
Click on Picture to Enlarge
Contemporary
Late Model appearance. The base body is formed with a flat deck and
molded in driver figure. The roof is a separate piece to be added to
the base body or the base body can be used by itself as a topless Late
Model body. The separate roof piece can be attached with double faced
tape or bolts and nuts. No hardware is included. If ordered with the
roof piece paint mask is included. The base body comes with add on
rear spoiler and fins. Body is available now.
McA #239 Bluegrass Late Model
body, 1/10th scale. 200mm wide comes with mounting hardware Internet
price $28.00
|
|
. |
|
. |
|
Click on Picture to Enlarge
New Econo Truck mounted foam wheels are a inexpensive
wheel compare to the Dirt Master Racing Tires. the foam is Jaco foam
mounted to a Proline Wheel. The wheels will come in a Green, Silver, or
Pink compounds. The wheel will only fit Associated Truck’s with a 3/16
axel.
|
|
SRP No ETF-01 Front
Green Associated
wheels Internet Price $21.00
|
| |
|
SPR No ETF-02 Rear
Green
Associated wheels Internet Price $21.00
|
| |
|
SRP No ETF-01 Front
Silver Associated
wheels Internet Price $27.95
|
| |
|
SPR No ETF-02 Rear
Silver
Associated wheels Internet Price $27.95
|
| |
|
SRP No ETF-01 Front
Pink Associated
wheels Internet Price $31.95
|
| |
|
SPR No ETF-02 Rear
Pink
Associated wheels Internet Price $31.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
