|
Picture |
SRP Part # |
Description |
Price |
PayPal |
Click to Enlarge |
SRP No 701 Radial Grooving tool for truck foam |
Here are Brand new
Radial grooving tools that are made to cut Truck foam tires. The
tool comes in a one piece set one is for the front and one for the
rear. The tool was design too gently plunged in the tire as it
rotates. The tool has clearance for the tire to fit in between for
a visual guide. Then you can force the tool to cut the radial
groove for traction purpose. The tools have a number of serrated
teeth cut out for the number radial grooving to be cut in the
tires. The tool comes with 5 teeth cut for rears and the other
side has 9 teeth for a front tire. The 9 tooth is design for more
traction on a dusty surface. This tool was Design for the proper
use and handling. The buyer assumes all of the risk and liability
for any loss, damage or injury to persons or property resulting
from its use, Or misuse. When you purchase this tool you have
agreed too the terms.
|
Retails
$5.95 |
|
| |
| |
Click to Enlarge
Grooving tools are for Custom Works & Coopers
Foams
Here are Brand new Radial grooving tools that are made to cut
Custom Works & Coopers foam tires.
The tools come in a set one is for the front and one for the rear.
The tool was design too gently plunged in the tire as it rotates.
The tool has clearance for the tire to fit in between for a visual
guide.
Then you can force the tool to cut the radial groove for traction
purpose.
The tools have a number of serrated teeth cut out for the number
radial grooving to be cut in the tires.
Tools can be ordered in set of No2 teeth, No3 teeth, No4 teeth and
also can be ordered for the complete packaged
with 3 front tools and the 3 rear tools. This tool was Design for
the proper use and handling.
The buyer assumes all of the risk and liability for any loss,
damage or injury to persons or property resulting from its use,
Or misuse. When you purchase this tool you have agreed too the
terms. |
|
Picture |
SRP Part # |
Description |
Price |
PayPal
|
Click to Enlarge |
SRP No 703 No3 Radial Grooving Tool set front and rear. |
Grooving Tool set
front and rear
|
Retails
$9.50 |
|
| |
Click to Enlarge |
SRP No 704 No4 Radial Grooving Tool set front and rear. |
Grooving Tool set
front and rear
|
Retails
$9.50 |
|
|
|
Click to Enlarge |
SRP No 705 Radial Tire Grooving Tools |
Radial Tire Grooving
Tools Front & Rear Grooving Tools |
Retails
$10.95 |
|
|
|
Click to Enlarge |
SRP No 707 Radial Tire Grooving Tools |
Radial Tire Grooving
Tools Front & Rear Grooving Tools |
Retails
$10.95 |
|
| |
Click to Enlarge |
SRP No 710 8 Radial Grooving Tools 4 sets of front and rear. |
Radial Tire
Grooving Tools
New set comes with 3,4,5,7 fronts 3,4,5,7
These are design to fit RC4LESS CUSTOM WORKS COOPER RACING TIRES
BSR DIRT OVAL TIRES.
|
Retails
$34.00 |
|
| |
|
Picture |
SRP Part # |
Description |
Price |
PayPal
|
Click to Enlarge |
SRP No 700 Traction Barr Cutter |
GThis is a new tool
design for cutting the horizontal Traction bars in foam tires. The
tool measure 3/16 diameter the shaft is 3/32 and takes a 3/32
collect to fit a dremel tool. The tool has a depth of .100
thousandth of cutting and has a thickness of 1/32 wide. The tool
has a maximum of 7000 RPMs Extreme Caution needs to be taken when
using this tool. The cutting edges are very sharp and can cause
bodily harm. Always wear proper eye protection. The tool should
never been dropped or knocked over because damaged too the tool
will occur.
This tool was Design for the proper use and
handling. The buyer assumes all of the risk and liability for any
loss, damage or injury to persons or property resulting from its
use or misuse. When you purchase this tool you have agreed to the
terms.
|
Retails
$11.25 |
|
| |
|
|
|
|
